Samsung has started rolling out Galaxy A9 2018 May 2019 Patch of security with a version number of PDA A920FXXU1BSDA and CSC A920FODM1BSDA. You can download the firmware for the Galaxy A9 2018 SM-A920F with product code for India region. This firmware update is based on the latest Android 9 Pie with some of the bug fixes. You can wait for the OTA update for a few weeks to get on your device directly otherwise check out the full article where we will guide you how to flash it manually.
Now, if you don’t want to wait for the OTA notification, you can always flash the firmware update via Odin tool. Let’s check out the steps to flash via Odin flash tool.
But before that let’s take a look at the device specifications first.
Contents
Samsung Galaxy A9 2018 Specifications
Samsung’s Galaxy A9 (SM-A920F) sports a 6.3-inch Full-HD+ display at a resolution of 1080 × 2220 pixels. The phone is powered by the Qualcomm Snapdragon 660 SoC coupled with a 6GB RAM and 128GB internal storage. The storage can be expandable up to 512GB of MicroSD card.
The Galaxy A9 2018 features Accelerometer, Fingerprint Sensor, Gyro, Geomagnetic Sensor, and Hall Sensor. It runs on Android Oreo out-of-the-box. While the rear features a quad camera of 24MP CMOS f/1.7 + 10MP Telephoto CMOS F/2.4 + ultra-wide 8MP CMOS f/2.4 + 5MP depth sensor with CMOS f/2.2 lens. The front packs a single 24MP CMOS F/2.0 aperture lens.
It includes Wi-Fi 802.11 a/b/g/n/ac , a 3.5mm headphone jack, Type-C, GPS, ANT+, NFC, Bluetooth 5, etc. The handset offers a 3,800 mAh battery with fast charging support.
Steps to Download OTA (Over-The-Air) Update
The firmware OTA (Over-The-Air) update usually comes automatically based on region and IMEI series. That may take a few days or weeks depends on the series. Otherwise, you can check out the firmware update availability manually from your device for now. Follow the mentioned steps:
- Go to your phone Settings > System Update.
- Tap on Check for Latest Updates.
- If the A920FXXU1BSDA May 2019 Security Patch update available for your device, then tap on Download and Install the update directly.
It’s recommended to download the OTA update via a Wi-Fi connection as the update size may be larger sometimes. This will save your carrier data charges as well.
Details of Firmware
- Device Name: Samsung Galaxy A9 2018
- Model: SM-A920F
- Baseband Version: A920FXXU1BSDA
- Security Patch Level: 2019-05-01
- Software Supported: ODIN Tool
- Android OS: 9.0 Pie
Steps to Install May 2019 Patch on Galaxy A9 2018
If you don’t want to wait, you can always flash the Samsung Firmware by the Odin flash tool on your device. We have provided the installation process and pre-requirements of flashing Samsung Firmware via Odin tool.
Check out the requirements from below:
Pre-Requirements:
- This guide and firmware are only for Galaxy A9 2018 (SM-A920F) device. Don’t try it on other devices.
- Download the required firmware and drivers from the above links.
- Your device must have at least 50% – 70% Battery.
- You need a PC or Laptop to install this firmware.
- A USB Cable for your device.
- Take a Full Backup on your phone before Installing any new firmware. So make sure you have data’s in case if something Wrong (This Process won’t lose your data).
- You must install Samsung USB Drivers on your PC.
- Download and Install Samsung Kies software.
- You need to Enter the Samsung Download Mode.
Download A920FXXU1BSDA Stock Firmware Update for Galaxy A9 2018
Here the download link is given below for the stock firmware update for Galaxy A9 (2018) with the May 2019 security patch.
Manual Installation Guide
Just follow the link mentioned below to get step-by-step details on how to flash the Samsung firmware to complete stock via Odin Flash Tool. You can check out our video guide as well.
You’re done. We assume that you have successfully installed the latest May 2019 Security Patch update on your Galaxy A9 2018. If this guide was helpfule to you, feel free to comment your thoughts or experience in the below.
0 comments:
Post a Comment